SEALEX®
HYDRUALIC SYSTEMS LEAK PREVENTER
Add To:
Power Steering – Dozers – Fork Lifts – Back Hoes – Farm Machinery
– Cranes – All Hydraulic Rams – Radiators
STOPS LEAKS AND
LUBRICATES WATER PUMPS, STANDARD TRANSMISSIONS
*DO NOT USE IN AUTOMATIC TRANSMISSIONS*
The superior lubricating properties of Sealex® will cause slippage
of plates
Sealex®
Frequently Asked Questions:
What is it / what does it do?
HYDRUALIC SYSTEMS LEAK PREVENTER
“SEALEX”
is premixed for best results, in a few ounces of the type of oil
or fluid in your system and added to the reservoir. The
equipment should be put to work as soon as possible so as not to
let the product settle. “SEALEX” then begins to flow
throughout the system until it encounters the source of the
leak. The tiny particles enter the leak path and build on
themselves bridging off the gap in the o-ring, gasket or seal. A
very simple principle and cost effective saving loss of oil that
can cause starvation of oil from moving parts, oil spillage not
to mention down time for repairs of equipment.
How do you use it (mix with oil
etc.)?
“SEALEX”
is premixed for best results, in a few ounces of the type of oil
or fluid in your system and added to the reservoir. The
equipment should be put to work as soon as possible so as not to
let the product settle. “SEALEX” then begins to flow
throughout the system until it encounters the source of the
leak. The tiny particles enter the leak path and build on
themselves bridging off the gap in the o-ring, gasket or seal. A
very simple principle and cost effective saving loss of oil that
can cause starvation of oil from moving parts, oil spillage not
to mention down time for repairs of equipment.
How much do I use?
Typical dosage
is 1 vial.
What types of fluids can I mix it with or what can I use it for
(engine oil, hydraulic systems, what other car parts, etc.)?
Add “SEALEX” to 5 or 6 oz.
of same type of oil or fluid that is now being used in the
system (any type of clean glass or metal cup can be used for
this).
How much does it cost?
$9.95/vial
(Sold in Cases of 12)
What are the benefits?
- A quick and easy fix to
problematic fluid systems.
- Saves on costly repairs to equipment.
- Preventive measure for equipment.
- Saves down time caused by equipment failure.
- Inexpensive to use.
NOTE: “SEALEX” should not
be used in automatic transmissions or where warranties on
equipment may be voided by the manufacturer due to the use of
oil additives.
Will it damage my car engine?
“SEALEX”
should NOT be used in hydraulic systems where wet disc brakes
and/or power shift transmissions are all fed from the one tank.
The reason is quite simple in that additives in the hydraulic
oil cause it to increase friction when plates of the
transmission are engaged. “SEALEX” on the other hand, by
it’s nature decreases friction so it should not be used in
systems that operates similarly to automatic transmissions.
However, “SEALEX” will work with excellent results in
hydrostatic systems such as those found on combines and swathers.
Regarding warranties, Sealweld Corporation would recommend
against using “SEALEX” in any machinery that is still
under warranty to avoid problems with the manufacturer.
Why can't I use it in an
automatic transmission?
The superior lubricating properties of
Sealex® will cause slippage of plates
Can I use it in a manual
transmission?
Yes.
Where can I get it?
